Web pages
3.9 Topology
"Set topology" with failed device
If a device has failed in the meantime, this device remains in the same place in the "Set
topology" view. The failed device is displayed with a red border around the device header
and the
Figure 3-44
"Actual topology" with failed device
In the "Actual topology" view, the device that has failed in the meantime is displayed
separately in the bottom area of the view. The failed device is displayed with a red border
around the device header and the
Figure 3-45
80
icon.
"Set topology" with failed device
"Actual topology" with failed device
icon.
Function Manual, 11/2019, A5E03484625-AG
Web server