Siemens SIMATIC S7-1500 Function Manual page 99

Web pages
3.13 Record
Symbol Function
Arrange in tracks
/ Unit switching of the time axis
Display measurement points
/ Interpolation on/off
Grid
Vertical measurement cursor
Horizontal measurement cursor
Difference of the measurement cursor Display of the difference of the horizontal and vertical measure-
Show legend
Align the chart legend to the left
Align the chart legend to the right
Change background color
Identification
All icons in the toolbar are equipped with tooltips.
98
Description
Activate or deactivate the trace arrangement.
When the trace arrangement is activated the signals are arranged
among themselves with the relevant value axes.
Signal groups are displayed in the same trace.
This setting does not affect the display for the bit tracks.
Switching the unit of the time axis
You can enter the following information:
Measuring points
•
Time (relative time related to the trigger time)
•
Trigger stamp of the measurement points
•
The button displays the measurement point as small circles on the
curves.
The buttons activate / deactivate the interpolation of the data of the
trend diagram.
The button activates / deactivates the grid of the trend diagram
and regulates its brightness in the Levels 1 to 9.
Display of vertical measurement cursor.
The vertical position of the two measurement cursors can be mo-
ved with the mouse.
The values of the signals and the difference between two measu-
ring points are displayed in the signal table for all displayed signals
and also in the trend diagram for the selected signal.
The measuring point or the relative/absolute time to the measure-
ment cursors is displayed depending on the set unit of the time
axis (X axis) in the movable pop-up window "Measuring
points/Time values".
Display of the horizontal measurement cursors.
The horizontal position of the two measurement cursors can be
moved with the mouse.
The Y values of the measurement cursor for the selected signal
are displayed in the movable pop-up window "Y values".
ment cursors and the Y values at the intersections with the vertical
measurement cursors.
Showing or hiding of the legend in the curve diagram and the bit
track labels.
Display of the legend and the bit track labels on the left side of the
curve diagram.
Display of the legend and the bit track labels on the right side of
the curve diagram.
Changeover between various background colors.
The following table provides an overview of marked signal areas.
Note that selections are possible only for analog and real signals
(no calculated signals).
Function Manual, 11/2019, A5E03484625-AG
Web server