3.7
Alarms
Requirements
The alarm texts were configured in the user-specific languages. For information about
configuring alarm texts, refer to STEP 7 and to the Service&Support pages
(http://www.siemens.com/automation/service&support).
Alarms
To receive compact information on fault analysis, we recommend that you always first read
out the content of the alarm buffer. This is the most effective method to get an overview of
the pending faults.
The browser displays the content of the alarm buffer on the "Alarms" web page.
Figure 3-34
Web server
Function Manual, 11/2019, A5E03484625-AG
Alarms
Web pages
3.7 Alarms
65