3.9.2
Graphical view
Requirements
For error-free operation of the topology, the following conditions must be met:
● You have made the Language settings (Page 29).
● In the Topology Editor of STEP 7, you configured the topological interconnection of ports
(requirement for display of the set topology and the corresponding topological target
connections).
● The project has been compiled in STEP 7.
● The project is completely loaded.
Set and actual topology - graphical view
You can select the interface with the topology you want to display (X1, X2, X3 or PROFINET
communication modules such as CM 1542-1) at the top left of the "Topology" Web page.
Figure 3-39
Graphical view - Set and actual topology
Web server
Function Manual, 11/2019, A5E03484625-AG
Web pages
3.9 Topology
73