Opening measurements
To open a measurement, right-click on a measurement to select it from the "Trace
recordings" area. Then select the command "Show in chart" in the shortcut menu.
The measurement is displayed in the "Curve diagram and bit track" area.
Figure 3-52
Displaying an individual measurement
To display multiple measurement at once, right-click on a measurement to select it from the
"Trace recordings" area. Then select the command "Add to table" in the shortcut menu.
The measurements are displayed in the "Curve diagram and bit track" area.
Figure 3-53
Displaying several measurements
Web server
Function Manual, 11/2019, A5E03484625-AG
Web pages
3.13 Record
95