Requirements
● You have assigned symbolic names to the tags you want to use on your web page in
STEP 7 .
● In the Inspector window under "Properties > General > Web server", you have at least:
– Activated the Web server
– Assigned read-only or read and write permissions to the users for user pages (see
● You have completed all necessary communication settings (IP address parameter,
subnet mask, etc.).
● You have downloaded the configuration.
● You have created your user page in an HTML editor of your choice:
– Automatic HTML pages, if you want to disable control of the page layout by means of
– Manual HTML pages, if you want to enable control of the page layout by means of the
Web server
Function Manual, 11/2019, A5E03484625-AG
section Configuring the Web server (Page 19))
the user program (requires at least one call of SFC 99).
Changes in mode from RUN to STOP do not affect the call of the user pages.
user program (cyclic call of SFC 99 required).
Web pages
3.16 User pages
121