Deleting Information From The Acl - HP StorageWorks Modular Smart Array 1000 cs User Manual

Using the CLI

Deleting Information from the ACL

After the ACL has been set up, access permissions for certain LUNs may need to
be removed.
Basic command
Command options
Two methods of removing access to previously assigned LUNs are available:
Note:
deleted, all connected servers have unlimited access to the storage.
Deleting information from the ACL using the connection name
Example command
Command options used
Example CLI response
58
DELETE ACL
—the name of the connection for which to remove
CONNECTION=xxx
permissions.
—which LUNs to remove from the ACL of the indicated server.
UNIT=xxx
Deleting information from the ACL using the connection name
Deleting information from the ACL using the WWPN
If all entries in the ACL are being deleted, immediately after the last entry is
CLI> DELETE ACL CONNECTION=ABC UNIT 0
—entries will be deleted from the ACL of the connection
CONNECTION=ABC
named ABC.
—LUN 0 is to be deleted from the ACL of the named connection
UNIT=0
Disallowing 12345678-12345678 access to unit 0.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
.