HP StorageWorks Modular Smart Array 1000 cs User Manual page 42

Using the CLI
Creating a LUN with an assigned spare
To create a LUN and assign a spare at the same time, use the
and include the
Note:
be available to multiple LUNs.
Example command
Note:
used in other CLI commands. In addition to recording the unit number, the drives
included, RAID type and size, and record
Command options
Note:
be designated as a spare for the LUN.
Example CLI response
42
SPARE=
More than one spare can be assigned to the same LUN and the same spare can
CLI> ADD UNIT 4 DATA="DISK211-DISK212" RAID_LEVEL=1
SPARE="DISK213"
Maintain a record of the units as they are created. These Unit ID numbers are
—LUN 4 is to be created.
4
DATA="DISK211-DISK212"
incorporated into the LUN.
—RAID 1 will be used when creating the LUN.
RAID_LEVEL=1
—the drive in bay 13 of box 2 will be assigned as a spare
SPARE="DISK213"
drive to the LUN.
Quotation marks must be entered both before and after the disk drive that is to
First volume to be configured on these drives.
Logical Unit size = 69460 MB
RAID overhead = 69460 MB
Total space occupied by new unit = 138920 MB
Free space left on this volume = 0 MB
Unit 4 is created successfully.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
command option.
the order in which they are created
—drives 11 through 12 in box number 2 are to be
command
ADD UNIT
.