HP StorageWorks Modular Smart Array 1000 cs User Manual page 17

Figure 3: HyperTerminal COM1 Properties dialog box
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
d. In the Connect To dialog box, expand the Connect using drop-down
box, select the appropriate COM port, and click OK.
Figure 2 illustrates selecting COM1.
The COM Properties dialog box is displayed.
Figure 3 is an example of the COM1 Properties dialog box.
e. In the COM1 Properties dialog box, enter the following settings, also
listed in Figure 3, and click OK.
Bits per Second: 19200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
The CLI input screen is displayed.
f. In the CLI session screen, press Enter several times to display the
command prompt (
Commands can now be entered at this CLI prompt.
).
CLI>
Overview and Setup
17