Access Control List Commands - HP StorageWorks Modular Smart Array 1000 cs User Manual

Access control list commands

When multiple servers access the storage of the MSA, it becomes necessary to
restrict access to LUNS to specific servers. The CLI uses an Access Control List
(ACL) to enter the list of LUNs a server can access.
Each of the following commands is used to set up and manage the ACL:
Each of these tasks is defined in the following sections.
Note:
WWPN of each HBA connected to the MSA.
The connection name or the WWPN is used when entering ACL information.
See
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
Viewing the ACL
Adding to the ACL
Deleting Information from the ACL
Disabling the ACL
Use the
SHOW CONNECTIONS
"Viewing connection information" on page 30
command to display the connection name and the
for details about this command.
Using the CLI
55