Changing The Name Of A Connection; Changing The Hba Of A Connection - HP StorageWorks Modular Smart Array 1000 cs User Manual

Changing the name of a connection

To change the name associated with a connection:
Basic command
Example command
Command options
Example CLI response

Changing the HBA of a connection

When a new HBA needs to be associated with an existing connection name:
Basic command
Example command
Command options
Example CLI response
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
RENAME CONNECTION
CLI> RENAME CONNECTION ABC XYZ
—the current name of the connection that is to be changed.
ABC
—the new name to assign to the connection, up to 16 alphanumeric
XYZ
characters.
Connection(s) has been renamed successfully.
SET CONNECTION
CLI> SET CONNECTION ABC WWPN=12345678-Y999999Y
—the connection to make the changes to.
ABC
WWPN=12345678-12345678
HBA to associate with the connection.
WWNN=12345678-12345678
new HBA to associate with the connection.
Connection(s) has been set successfully.
The WWPN of connection ABC is set to 12345678-Y999999Y
successfully.
—the World Wide Port Name (WWPN) of the new
—the World Wide Node Name (WWNN) of the
Using the CLI
53