HP StorageWorks Modular Smart Array 1000 cs User Manual page 40

Using the CLI
Example CLI response
Creating Multiple LUNs on a group of drives
To carve out multiple LUNs from a drive or group of drives, use the
command and include the
unique LUN ID for each LUN, along with the desired size parameter.
Example command
Note:
used in other CLI commands. In addition to recording the unit number, the drives
included, RAID type and size, and
Command options
40
First volume to be configured on these drives.
Logical Unit size = 69460 MB
RAID overhead = 0 MB
Total space occupied by new unit = 69460 MB
Free space left on this volume = 0 MB
Unit 0 is created successfully.
CLI> ADD UNIT 1 DATA="DISK111-DISK114" RAID_LEVEL=5
STRIPE_SIZE=32 SIZE=1000MB
Maintain a record of the units as they are created. These Unit ID numbers are
—LUN 1 is to be created.
1
DATA="DISK111-DISK114"
LUN.
—RAID 5 will be used when creating the LUN.
RAID_LEVEL=5
—stripe size of 32 will be used when creating the LUN.
STRIPE_SIZE=32
—1000 MB of the available space will be used for the LUN.
SIZE=1000MB
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
command option. Repeat the command using a
SIZE=
record the order in which they are created
—drives 11 through 14 in box number 1 to the
ADD UNIT
.