Table of Contents
Advertisement
Deleting information from the ACL using the WWPN
Example command
Command options
Example CLI response
Disabling the ACL
If the ACL has been set up, but the decision has been to not use it and not limit
access to the storage, the entries in the ACL need to be deleted. Use the following
command to delete all entries in the ACL.
Basic command
Example CLI response
Note:
All storage is immediately available to all connected servers.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
CLI> DELETE ACL WWPN=12345678-12345678 UNIT=1
WWPN=12345678-12345678
connection with a WWPN of 12345678-12345678.
—LUN 1 will be removed from the ACL of the named connection.
UNIT=1
Disallowing 12345678-12345678 access to unit 1.
SET ACL DISABLE
Disabling acl
When this command is used, all existing ACL entries are automatically deleted.
—entries will be deleted from the ACL of the
Using the CLI
59
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks Modular Smart Array 1000 cs and is the answer not in the manual?
Questions and answers