Overview And Setup - HP StorageWorks Modular Smart Array 1000 cs User Manual

Overview and Setup

The Command Line Interface (CLI) is used to configure and manage the
MSA1000 Controller and its storage.
In addition, the CLI can be used to display system setup information and status. It
may also provide information on devices that are attached to the controller.
Note:
The CLI is accessed through a host computer connected to the serial port of an
MSA1000 Controller.
Some CLI configuration and management tasks include configuring storage units
(LUNs), setting the addressing mode, limiting access to storage, and viewing
information on MSA components (controller, unit, and cache).
This chapter discusses:
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
The CLI is available for all supported operating systems.
Overview, page 12
Setup, page 15
1
11