Deleting Luns - HP StorageWorks Modular Smart Array 1000 cs User Manual

Using the CLI
Example CLI response

Deleting LUNs

To delete the last created LUN:
Note:
deleted. It is important to maintain a record of the unit numbers and the order in which
they are created.
Note:
new LUN. Unit numbers are not automatically reassigned when a LUN is deleted.
Basic command
Example command
Command options
Example CLI response
44
First volume to be configured on these drives.
Logical Unit size = 69460 MB
RAID overhead = 69460 MB
Total space occupied by new unit = 138920 MB
Unit 2 is created successfully.
If more than one LUN has been created, only the last LUN created can be
After a LUN is deleted, its unit number goes unused until manually assigned to a
DELETE UNIT
CLI> DELETE UNIT 4
—the unit to delete. This is the same number that was given to the unit when
4
it was created with the
deleted.
Data will be lost after the unit is deleted.
Do you still want to DELETE unit 4 (Y/N)? Y
Please wait while unit 4 is being deleted...
Unit 4 is deleted successfully.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
command. In this example, LUN 4 is to be
ADD UNIT