Setting The Connection Profile - HP StorageWorks Modular Smart Array 1000 cs User Manual

Using the CLI

Setting the connection profile

To change the operating-system profile associated with an existing connection:
Note:
Basic command
Example command
Command options
Example CLI response
52
The connection profile is sometimes referred to as the Host Mode.
SET CONNECTION X PROFILE=Y
CLI> SET CONNECTION ABC PROFILE=WINDOWS
—the name of the connection to modify, in this example ABC.
ABC
WWPN=12345678-12345678
the WWPN of the HBA. The "show connections" can be used to obtain the
WWPN.
WWNN=12345678-12345678
the WWNN of the HBA. The "show connections" command can be used to
obtain the WWNN.
—the platform of the host, which in this example is
PROFILE=WINDOWS
Windows. See "Naming a
The Profile of Connection ABC is set to Windows successfully.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
—the WWPN of the connection to modify, using
—the WWNN of the connection to modify, using
connection" for a list of profile types.