Viewing The Acl; Adding To The Acl - HP StorageWorks Modular Smart Array 1000 cs User Manual

Using the CLI

Viewing the ACL

To display the current ACL:
Basic command
Command options
There are no available options for this command.
Example CLI response

Adding to the ACL

To indicate the allowable LUNs for each server:
Basic command
Command options
Two methods of entering LUN assignments are available:
Note:
ACL, access to the storage is limited to the servers and LUNs listed in the ACL.
56
SHOW ACL
ACL is enabled:
Connection WWPN
ABC 11111111-22222222
XYZ 33333333-44444444
Inaccessible Units: 5,6
ADD ACL
—the name of the connection to grant access, where xxx
CONNECTION=xxx
represents the connection name.
—which LUN to assign to the indicated server.
UNIT=xxx
Options include:
An individual LUN can be assigned by entering one LUN ID (UNIT=0)
A group of LUN can be assigned by entering a range of LUN (UNIT=1-3)
Access to all units can be granted by entering UNIT=ALL.
Adding to the ACL using the connection name
Adding to the ACL using the WWPN
There is no command to activate the ACL. After the first entry is added to the
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
Units
0,1,2
2,3,4