Setting The Controller Id - HP StorageWorks Modular Smart Array 1000 cs User Manual

Note:
Example CLI response

Setting the controller ID

To assign a unique name to each controller installed in the MSA:
Basic command
Example command
Command options
Example CLI response
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
"—the system name, where XXX represents any user
SYSTEM_NAME="XXX
defined phrase, up to 20 alphanumeric characters.
—the read cache. This value must be between 0 and 100.
READ_CACHE=50
—the write cache. This value must be between 0 and 100
WRITE_CACHE=50
Read_cache plus write_cache must equal 100.
Global Parameters:
System Name:XXX
Rebuild Priority:HIGH
Expand Priority:HIGH
Total Cache:256MB
50% Read Cache:128MB
50% Write Cache:128MB
SET THIS_CONTROLLER_ID
SET OTHER_CONTROLLER_ID
CLI> SET THIS_CONTROLLER_ID 123
—the user-defined ID for the controller.
123
The ID can be up to 230 alphanumeric characters or a decimal number in the
range of 0 though 65535. In this example, the controller ID will be changed
to 123.
CLI> SET THIS_CONTROLLER_ID 123
Controller identifier 123 created.
Using the CLI
.
33