HP StorageWorks Modular Smart Array 1000 cs User Manual page 37

Locating all drives for a specific SCSI bus
To flash the LEDs of all drives connected to a specific SCSI bus:
Example command
Locating all drives in a specific LUN
To flash the LEDs and locate all drives associated with a specific LUN:
Example command
Locating specific drives
To flash the LEDs to locate an individual drive or group of drives:
Example command
Canceling a LOCATE request
To stop the flashing of the drive LEDs caused by a previous
and return the drive LEDs to normal operations:
Example command
There are no available options for this command.
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
CLI> LOCATE BUS 1
—all drives connected to bus number 1 will be flashed.
BUS 1
CLI> LOCATE UNIT 1
—the drives in LUN 1 will be flashed.
UNIT 1
—all drives incorporated into LUNs will be flashed.
UNIT ALL
CLI> LOCATE DISK DISK102-DISK106
DISK DISK102-DISK106
will blink.
CLI> LOCATE CANCEL
—the LEDs on drives in bays 2 through 6 in box 1
Using the CLI
command
Locate
37