Clear Dsr Report Message Format - Intel iSBC 546 Hardware Reference Manual

FIRMWARE
Host CPU to iSBC Controller Messages
B.3.2.1.13 CLEAR DSR REPORT.
This command cancels the previous
request to report DSR changes on the specified line. This is the
default condition after reset.
Figure B-18 shows the command format.
Message Format
a
1
2
15
Line Number
NOTE
aDH Reserved space
should be set to
Line Number
aa(H) .
Reserved
.
.
Reserved
The serial channel on which DSR Report is
cleared.
Figure B-18.
Clear DSR Report Message Format
B-29