FIRMWARE
Host CPU to iSBC Controller Messages
B.3.2.1.11
CLEAR CTS AND CD GATES.
This command causes the
controllers to transmit and receive on the specified line
regardless of CTS and CD. This is the default condition after
reset.
Figure B-16 shows the command format.
Message Format
NOTE
0
OBH
Reserved space
should be set to
1
Line Number
00 (H) .
2
Reserved
. .
15
Reserved
Line Number
The serial channel on which the CTS and CD
gates are cleared.
Figure B-16.
Clear CTS and CD Gates Message Format
B-27