Table of Contents
Advertisement
FIRMWARE
Host CPU to iSBC Controller Messages
B.3.2.1.10
SET CTS AND CD GATES.
This command causes the
controller's specified line not to transmit unless CTS is active
and not to receive unless CD is active.
Figure B-15 shows the command format.
Message Format
NOTE
0
OAH
Reserved space
should be set to
1
Line Number
00 (H) .
2
Reserved
.
.
15
Reserved
Line Number
The serial channel on which the CTS and CD
gates are set.
Figure B-15.
Set CTS and CD Gates Message Format
B-26
Advertisement
Table of Contents
