Compatibility - Siemens SIMATIC ET 200SP CM 1xDALI Manual

Product overview

2.2 Compatibility

2.2 Compatibility
Connection to the system
Through BaseUnit type U0, you can assemble a CM 1xDALI to the CPU, open controller, or
IM of the ET 200SP distributed I/O system.
Supported DALI devices
You can only use the input device which meets the standard of DALI-2, IEC 62386-103.
You can only use the control gear which meets the standard of DALI-1 or DALI-2. But on
DALI-1 control gears, you cannot use the new functionalities which are added in DALI-2
standard.
Library
The CM 1xDALI library is compatible with the S7-1500 based CPUs (CPU 15xx).
12
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
Manual, 06/2019, A5E46959434-AA