Dali_Dev_Download - Siemens SIMATIC ET 200SP CM 1xDALI Manual

Programming
5.7 Configuration function blocks
Table 5- 6 Description of STATUS on upload process
Device type STATUS
Control 16#01
gear
16#02
16#03
16#04
16#05
Input device 16#11
(Sensor)
16#12~16
#31
5.7.18

DALI_DEV_DOWNLOAD

Description
DALI_DEV_DOWNLOAD is used for downloading all the parameters that are saved in the
CM 1xDALI to the DALI device (refer to data flow path 3 (Page 23)). The control gear type or
sensor instance type are saved in CM 1xDALI, and these types must be the same as the
physic device's. This function block does not check whether the parameter saved in CM
1xDALI is valid for this DALI device.
It takes some time to execute this function block. If needed, you can use CANCEL to stop
the procedure before it is finished.
Note
The output resets, only if both the CANCEL and DOWNLOAD are set to 0.
102
Comment
Querying basic parameters
Querying extended parameters
Querying group configuration
Querying scene configuration
Saving all parameters
Querying sensor parameters and saving
Querying sensor instances parameters and saving:
16#12: The function block is dealing with the Instance 0.
•
16#13: The function block is dealing with the Instance 1.
•
...
•
16#31: The function block is dealing with the Instance 31.
•
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
Manual, 06/2019, A5E46959434-AA