Programming
5.7 Configuration function blocks
Table 5- 7
Description of STATUS on download process
Action
PROC
Control
16#01
Gear
16#02
16#03
16#04
16#05
Input device
16#11
(Sensor)
16#12
16#13~16
#32
5.7.19
DALI_DEV_RESET
Description
DALI_DEV_RESET is used for resetting all the parameters of the device.
After this function block is executed without errors, the physical device is reset and the
parameters which are saved in CM 1xDALI are all deleted. But the value of output
CONFIGURED in DALI_ECG_STATUS (Page 53) or DALI_SENSOR_STATUS (Page 60)
remains.
When you set the input "DEL_ADDR" to 1, the short address of the physical device is
deleted.
104
Comment
Querying status of the control gear
Setting basic parameters
Setting type-related parameters
Setting group configuration
Setting scene configuration
Querying status of the sensor
Setting parameters of the sensor device
Setting parameters of the sensor instances:
16#13: The function block is dealing with the Instance 0.
•
16#14: The function block is dealing with the Instance 1.
•
...
•
16#32: The function block is dealing with the Instance 31.
•
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
Manual, 06/2019, A5E46959434-AA