Advertisement
Cisco Aironet Directional Hyperlocation Antenna (AIR-ANT25-LOC-02=)
Technical Specifications
Antenna Type
Operating Frequency Ranges
Peak Gain
Nominal Azimuth Plane 3-dB Beamwidth
Nominal Elevation Plane 3-dB Beamwidth
Nominal Input Impedance
VSWR
Polarization
V-Pol Maximum Sidelobe Level
H-Pol Maximum Sidelobe Level
Front-to-Back Ratio
Connector Type
Length
Width
Height
Weight
Water/Foreign Body Ingress
Operational Wind
Operating Temperature Range
D r a f t L a b e l — C i s c o C o n f i d e n t i a l
Printed Dipole, Dual-Band, with Location Array
2.4-2.484 GHz
4 dBi, for Wi-Fi Element
N.A. for Location Sensor
105 Degrees, for Wi-Fi Element
140 Degrees, for Location Sensor
60 Degrees, for Wi-Fi Element
85 Degrees, for Location Sensor
50 Ohms
1.5:1
Vertical
-15 dBc
-10 dBc
> 30 dB
Five cables which include the following:
One cable with a rectangular (DART) connector that attaches to the
Hyperlocation module.
Four coaxial cables with RP-TNC connectors that attach to the AP's antenna
connectors.
Although two cables are labeled A and two are labeled B, this has no
Note
significance to the order in which these cables are attached to the Cisco
AP3702E.
14.5 in. (36.8 cm)
20 in. (50.7 cm)
0.8 in. (2.11 cm)
81.1 oz. (2.3 kg)
IP67
100 MPH
-40° C to 85° C
3
5.15-5.925 GHz
5 dBi, for Wi-Fi Element
N.A. for Location Sensor
105 Degrees, for Wi-Fi Element
150 Degrees, for Location Sensor
60 Degrees, for Wi-Fi Element
100 Degrees, for Location Sensor
50 Ohms
1.5:1 (above 5.7 GHz to 5.9 GHz)
2:1 (from 5.15 GHz to 5.7 GHz)
Vertical
-12 dBc
-12 dBc
> 30 dB
Advertisement
