Table of Contents
Advertisement
4.12 Changing the cloth pressure bar
Cover
• Motor cover ( p. 16)
Fig. 65: Changing the cloth pressure bar (1)
①
②
③
(1) - Bearing with gear wheel
(2) - Threaded pins
(3) - Drive
Disassembling the cloth pressure bar
To disassemble the cloth pressure bar:
1. Loosen the threaded pins (2) and pull the bearing with the gear
2. Dismantle the drive (3).
3. Loosen all 3 screws (4) and remove the drive shaft.
4. Loosen the screw (5).
81
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch the machine off before you disassemble or
assemble the cloth pressure bar.
④
wheel (1) out towards the front.
⑤
(4) - Screws
(5) - Screw
Service Instructions 911-211 - 02.0 - 10/2016
Machine head
Advertisement
Table of Contents
