Table of Contents
Advertisement
Working basis
Removing the lock
1. Pull the locking peg (6) out of the slot (5).
3.7 Putting the machine into position
For some settings, the machine must be put into a certain position, using
the hand crank on the arm cover. The machine has no handwheel.
Fig. 19: Putting the machine into position
①
(1) - Hand crank
To set the machine into position:
Press down and turn the hand crank (1) until the machine is in the setting
position.
29
Service Instructions 911-211 - 02.0 - 10/2016
Advertisement
Table of Contents
