Machine head
Fig. 66: Changing the cloth pressure bar (2)
(6) - Block
(7) - Clip
(8) - Cloth pressure bar
5. Position the clip (7) so that the screw (7) is accessible.
6. Loosen the screw (10) and take off the clip (7).
7. Pull the sleeve (10) out.
8. Pull the clamp (6) right up to the top and pull the cloth pressure bar (8)
Assembling the cloth pressure bar
To assemble the cloth pressure bar:
1. Assemble in reverse of removal.
Order
After the drive (3) has been tightened, set the sewing foot height ( p. 53).
Service Instructions 911-211 - 02.0 - 10/2016
⑥
⑦
⑧
out upwards.
(9) - Sleeve
(10) - Screw
⑩
⑨
82