6.17.1 Changing the contour of a seam program
To edit an existing seam program:
1. Tap the menu items
The contour adjustment window appears:
Fig. 100: Changing the contour of a seam program (1)
(1) - Cursor
2. Use the arrow buttons to move the cursor (1) to the position on the
Information
You can also use the slider control on the scale (2) to select the stitching
area you wish to change:
The first stitch of the seam is at the top and the last stitch is at the bottom.
3. Tap the Go To button.
The selected contour region is displayed in detail.
119
NOTICE
Property damage may occur!
If you have entered contour points that lie outside the sewing field,
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test after creating or editing a contour to
ensure that the entire contour lies within the permissible sewing field.
Bearbeiten (Edit)
(Seam program)
Contour)
.
①
contour that is to be changed.
The stitching point (2) to be modified is marked in red.
Konturanpassing (Adjust
>
(2) - Scale: First to last stitch
Service Instructions 911-211 - 02.0 - 10/2016
Programming
Nahtprogramm
>
②