Programming
Fig. 101: Changing the contour of a seam program (2)
(3) - Old stitching point
4. Use the arrow buttons to move the stitching point to the new position (4).
The modified seam path is displayed in green.
5. Tap the Weiter (Next) button.
The window for entering the technology operations opens.
Fig. 102: Changing the contour of a seam program (3)
6. Select the desired technology operation(s) for the new seam path
7. Confirm the selection with OK.
You are returned to the detail window with the modified contour.
8. Tap the Weiter (Next) button again.
A query dialog is displayed, asking if you wish to adopt the changes.
Important: Always perform a contour test after modifying a contour to
ensure that the new seam path lies within the permissible sewing
field ( p. 113).
Service Instructions 911-211 - 02.0 - 10/2016
③
④
( p. 99).
Agreeing to this dialog will save the modified contour.
(4) - New stitching point
120