4.9.3 Replacing the thread burner tips
Cover
• Burner cover ( p. 23)
• Swivel up the machine head ( p. 15)
Fig. 60: Replacing the thread burner tips
①
②
(1) - Screws
To replace the thread burner tips:
1. Loosen the screws (1).
2. Change the burner tips (2).
3. Tighten the screws (1).
4. Tap on Extras > Service > Multitest > Fadenbrenner
5. Use Brenner an (Burner on) to verify that the burner tip is glowing
75
WARNING
Risk of injury from hot thread burner tip
Risk of burns.
NEVER touch the thread burner tip.
(Thread burner).
(turns off automatically after 10 s).
(2) - Thread burner tip
Service Instructions 911-211 - 02.0 - 10/2016
Machine head
②
①