Checking The Toothed Belt; Checking The Thread Suction Device; Parts List - DURKOPP ADLER 911-211 Service Instructions Manual

Hide thumbs Also See for 911-211:
Table of Contents

Advertisement

8.4 Checking the toothed belt

The condition of the toothed belt must be checked once a month.
Important
A damaged toothed belt must be replaced immediately.
Proper setting
• The toothed belt exhibits no cracks or fragile areas.
• When pressed with a finger, the toothed belt must yield no more than

8.5 Checking the thread suction device

Proper setting
The thread is sucked in properly. Check on a regular basis if the thread
suction device sucks in the thread properly without the walls of the hose
sticking together.
To check the thread suction device:
1. As soon as the thread is no longer sucked in properly, blow talcum

8.6 Parts list

A parts list can be ordered from Dürkopp Adler. Or visit our website for fur-
ther information at:
www.duerkopp-adler.com
155
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before checking the
condition of the toothed belt.
10 mm.
powder into the hose through the opening of the thread suction device.
Maintenance
Service Instructions 911-211 - 02.0 - 10/2016

Advertisement

Table of Contents
loading

Table of Contents