Hitches - Zetor MAJOR CL Operator's Manual

Rear three-point linkage
It is used for connection of the carried half-carried
agricultural machines and tools with hitch points of
category II according to ISO.
category II
hinge axis length
diameter of holes of
connecting balls of the
lower pull rods according
to ISO
hole diameter of upper
pull rod
1. Upper pull rod
2. Lifting pull rod left
3. Lifting pull rod right
4. Limiting pull rods
5. Lower pull rods
Safety principles when working with a three-point linkage
Persons who are not charged with work with
auxiliary device of a tractor must not stand between
a tractor and connected machinery (tools) - (A).
Do not park tractor with mounted tools in a lifted
position (B). When driving without tools it is neces-
sary to connect lower draw bars (5) by springs and
upper draw bars (1) to be placed to a flexible linkage!
When transporting tools it is necessary to adjust
limiting draw bars (4) of lower draw bars so that there
would be no unwanted side movement of tools!

HITCHES

870 mm
28 mm
25 mm
77
NM13N053
NM13N102