Engine Performance Limitation - Zetor MAJOR CL Operator's Manual

Engine Performance Limitation

The engine control unit will automatically limit the engine
in the following cases:
When the temperature of the cooling liquid exceeds
110ºC - the overheating signal lamp on the instrument
panel is activated (A).
Interrupt the work and leave the engine running at idling
speed until the temperature of the cooling liquid is
decreased and the signal lamp stops flashing.
If the temperature of the cooling liquid when the engine is
running at idling speed does not drop, stop the engine and
check the amount of the cooling liquid.
If the pressure of the cooling liquid in the equalizing
vessel drops below the critical limit, the error message
DTC: 111/1 is indicated on the instrument panel (B).
Check tightness of connections of the engine cooling
system and amount of the cooling liquid. Add the missing
amount to the upper mark indicated as MAX.
Do not release the overpressure plug unless
the cooling liquid is cold! Danger of scald burns!
DRIVING OPERATION
42
MCL18N019