Securing Lower Draw Bars With Cbm Hooks - Zetor MAJOR CL Operator's Manual

Securing lower draw bars with CBM hooks

For extremely demanding working conditions
(aggregation with heavy machinery on slopes or with
aggregation side faced machines) we recommend
safely locking the hook of lower draw bar by inserting
a M8 screw to (S) hole and locking the screw with
a pad.
*Front three-point hitch
It is designed for attachment of frontally carried
agricultural machines and implements in accordance with
ISO 8759-2.
During transport of a carried implement the
hitch must always be hydraulically locked in the lifted
position with valves that are installed on the left side
of the tractor over the front axle.
This hydraulic lock is recommended even in case no
machine is attached to the three-point hitch.
Controlling front three-point hitch
The hitch is equipped with two single acting hydraulic
cylinders which are supplied with oil from an additional
hydraulic distributor. To lift or lower, use lever (a) of the
additional distributor.
1 position lifting
2 position lowering
N position locking the hitch
P position not to be used
If the tractor is equipped with front three-point
hitch, use lever (a) to control it. When the front three-
point hitch is used, quick couplers cannot be
connected as they are pressured together with the
front three-point hitch! When you finish using the
front three-point hitch and want to use the section
with quick couplers 1 and 2 with connection to the
front three-point hitch, raise the arms of the front
three-point hitch to the transport position and move
the front three-point hitch lever to the 'locked'
position.
HITCHES
80
X901
E461
NM13N019