Cab Heating; Cab Heating Registers; Cab Air Condition - Zetor MAJOR CL Operator's Manual

Cab heating

The heating is located in the panel of the instrument
panel. The heating is switched by the switch (7). There are
four positions of the switch (7):
0 - switched off
I - lowest power of the heating fan
II - medium power of the heating fan
III - highest power of the heating fan
The temperature of the resulting air is adjusted with the
controller of the heating valve (8).
When the controller (8) is turned in the direction of the
arrow, the temperature of the resulting air is increased, in
the direction against the arrow it is decreased.

Cab heating registers

Heating registers are placed in the upper (A) and face
(B) part of the dashboard panel.
The lower registers (B) are opened by shifting the levers
(1) in the direction of arrows. By shifting the levers against
the direction of arrows, registers close.

Cab air condition

The air conditioning cabin is switched by the switch (1);
the switch (2) is used for adjustment of the air conditioning
fan power. The switches are positioned on the ceiling of
the cabin (A).
The air conditioning vents (3) are located in the roof of the
cab (B).
If the air conditioning is in operation, adjust the
vents (2) to the required angle so that no direct
blowing of people in the cabin occur (risk of diseases
because of intensive cooling of body parts).
The air conditioning can be operated only when
both switches (1) and (2) are on!
ACQUAINTANCE WITH THE TRACTOR
31
MCL18N002
NM15D089
MCL18N004