Awareness Technology Stat Fax 4200 Operator's Manual page 37

Factor Mode (Continued)
The Factor Mode Test Definition Final Page will display and allow editing of Interpretation
Mode, Units, Decimals, and number of Sample Replicates. Selecting the Units field on the
Factor Mode Test Definition – Final Page will display a list of seven measurement
designations including a customizable selection, which are stored for labeling the
concentration column (see Section 2.4.3 Unit of Measurement Codes). Use the arrow keys
to advance through the options and press the Edit key to change the values of the
selections on the screen. Press Save to save the selections.
Selecting the Interpretation Mode field will open the Test Definition Interpretation screen for
editing the Interpretation controls. Use the arrow keys to advance through the options,
press the Edit key to change the value of the selection.
Factor Mode Test Definition –Pos/Neg Interpretation
Editing the Interpretation Pos/Neg field will display the Interpretation Normal option for
inputting Normal Range Low, Normal Range High, Valid Range Low, or Valid Range High.
Press the Done button when editing is completed.
TEST DEFINITION Interpretation
Factor Mode Test Definition –Normal Interpretation
Stat Fax
TEST DEFINITION Final page
Interpretation Mode
Units
Decimals
# Sample Replicates
<< Save
Factor Mode Test Definition - Final Page
TEST DEFINITION Interpretation
Pos/Neg
Interpretation
Pos >=
Neg <
Reversed
Interpretation
Normal Range Low
Normal Range High
Valid Range Low
Valid Range High
® 4200 Operator's Manual Doc. 4200 Rev. K
Exit
Pos/Neg
Conc ^
1 v
1
Edit
Run Print
^
v
NO Edit
Done
Normal
^
v
Edit
Done
NOTE: Double
check that the
interpretation
information you
entered is correct.
33