2.3.3 Manage Tests
Detailed descriptions of the Modes of Operation may be found in Section 2.5.
Select Manage Tests on the Main display screen and the following options will display:
The functions of the Manage Tests options are:
Feature
Create Test
Allows user to:
• Name the test
• Select the Mode (Absorbance, Factor, Single Standard, Point to
• Select the Primary Filter
• Select the Differential Filter
• Enable/Disable Blank (Yes or No) Note: Default is 'yes' for
• Set number of blank replicates
• Interpretation Criteria (Positive and Negative interpretation, or
• Select Units
• Input Decimals
• Enable % Absorbance (Yes or No)
• Input number of Standards
• Input number of Sample Replicates
• Select Axes
• Controls management (Enable; name; number of replicates;
Stat Fax
Create Test
Edit Test
Delete Test
Print Test List
Figure 2.3.3-1 Manage Tests options
Point, Regression, Cubic Spline, Cut Off)
Single Standard Mode.
Normal and Valid Ranges)
input low/high ranges; input action to take (i.e. warn, continue
or end test); record Lot Number; input expiration date; location).
®
4200 Operator's Manual Doc. 4200 Rev. K
Multi-Test
Clone Test
Exit
Function
17
Need help?
Do you have a question about the Stat Fax 4200 and is the answer not in the manual?