Software
Speed: ........................................................................ Reads absorbance of 96 wells in about
Calculation Modes: ..................................................... Factor, Single Standard, Point-to-Point,
Test Storage: .............................................................. Stores 120 tests; stores all parameters
Other
Enclosure: .................................................................. Flame-retardant ABS/PVC alloy material
Dimensions: ............................................................... Approximately 13.5"Wx17"Dx8-1/4"H
Weight ........................................................................ 12 lbs (5.5kg)
Certifications: ............................................................. CE, ETL listed,
Recommended Environmental Conditions
Indoor use
Mains supply voltage:
Recommended Operating Temperature .................... 18-35°C
Recommended Operating Humidity: .......................... less than 80%
Storage Temperature: ................................................ 10 to 50°C
NOTE: Although it may be safe to operate in these conditions, it may not be
suitable for the performance of your tests. Check with your reagent supplier.
Accessories sold separately:
Stat Fax
®
4200 Operator's Manual Doc. 4200 Rev. K
10 seconds
Regression, Cubic Spline, Cut Off Mode
including wavelengths, calculations, unit
codes, linear and normal ranges,
standard values, test names, and
previous standard curve.
cover with aluminum base
(34.3cmx43.2cmx21cm)
NRTL listed (USA/CAN)
Fluctuations not to exceed + 10% of
nominal voltage
Thermal paper (contact your dealer)
7
Need help?
Do you have a question about the Stat Fax 4200 and is the answer not in the manual?
Questions and answers