Table of Contents
Advertisement
This chapter provides information concerning the following:
For information about...
LEDs
Troubleshooting Checklist
Replacing the 7100G-Series Fan Module
Removing a Power Supply
Using the OFFLINE/RESET Button
LEDs
The 7100G-Series switch has port, system, and power supply LEDs.
Port LEDs
On the 7100G-Series switch, you can view:
•
The link, receive, and transmit activity on the RX and TX LEDs for the SFP+ ports. See
Figure 3-1
LED state definitions.
•
The link and data transmission activity on the port status LED for the QSFP+ ports. See
Figure 3-1
for LED state definitions.
•
The link and data transmission activity on the port status LED for the 1000 BASET (RJ45) ports
(see
•
The PoE status for PoE capable (10/100/1000 PoE (.at+ .af capable) RJ45 ports. See
Status
on page 3-2 for the port LED location (Callouts 1 - 4). See
on page 3-2 for the port LED location (Callouts 5 and 6). See
Figure 3-2
on page 3-3. See
LEDs" on page D-2 for PoE LED details.
Table 3-3
on page 3-3 for LED state definitions.
Enterasys 7100G-Series Hardware Installation Guide 3-1
Troubleshooting
Refer to page...
3-1
3-6
3-8
3-9
3-10
Table 3-1
on page 3-2 for
Table 3-2
3
on page 3-3
"PoE Port
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
