Adjusting The Bale Diameter - Welger RP 405 Operating Manual

Figure 78
Figure 79
Figure 80
72
8.2

Adjusting the bale diameter

8.2.1 RP 405 SPECIAL and RP 435
(Figure 78) Slacken the wing nut and adjust the desired bale
diameter with the pointer. The obtainable diameters are
between about 0.90 and 1.55 m for silage and 0.90 and 1.60
m for straw.
(Figure 82) Read the bale diameter currently reached on
display 2.
8.2.2 RP 435 MASTER
Actuate the right function key
symbol for "Bale diameter" appears in the display of the
control box (Figure 79).
Using the keys
The obtainable diameters are between about 0.90 and 1.55
m for silage and 0.90 and 1.60 m for straw.
(Figure 80) The arrow in the bar graph shows the selected
diameter value.
repeatedly until the
and set the desired bale diameter.
WELGER RP 405 • RP 435