Net Tying; Inserting The Net - Welger RP 405 Operating Manual

Figure 34
WELGER RP 405 • RP 435
6

Net tying*

6.1

Inserting the net

Attention, danger of injury!
Prior to inserting new net rolls and threading the net: stop
machine, switch-off power take-off shaft and tractor motor, take
out ignition key and wait for standstill of the machine. Make the
control powerless (disconnect electrical connection to the
tractor).
In order to handle the net roll safely, insert it together with the
help of a second person!
Attention, danger of injury by cutting!
There is danger of injury by cutting during work on the net knife
(Figure 47, item 10). Wear protective gloves.
Open left-hand side cover.
Attention, danger of injury by net knife turning down
automatically!
Only if the last wrapping process has not been completely
executed (e. g. because the net roll depleted during the
wrapping process): (Figure 34) Pull the handle of the knife
carrier hard to the front against the spring tension (the triangular
counting segment for the net length returns to its starting
position).
This prevents unexpected activation and automatic drop-down
of the net knife during threading of the net.
41