Windguard / Pick-Up Shield - Welger RP 405 Operating Manual

Figure 86
Figure 87
Figure 88
WELGER RP 405 • RP 435
8.6

Windguard / Pick-up shield*

In case of all pick-up models (Figure 87 and Figure 88) the
windguard is mounted movably – hanging above the pick-up.
Adjust the height of the windguard rake to the swath
thickness using the chain.
(Figure 86) To avoid that the pick-up grasps the chain the
upper end of the chain must always be fastened to the hook.
Caution!
On the pick-up with a pick-up width of: 2.25, both pick-up guide
wheels cover the circular path of the tines laterally and are
therefore also part of the safety equipment.
That is why both guide wheels must always be attached when
the baler is used.
75