To Heed In The Road Traffic - Welger RP 405 Operating Manual

18
2.12

To heed in the road traffic

Attention!
Prior to driving on the road ...
• ... the roll chamber must be completely emptied (acc. to road
traffic regulations).
• ... remove any crop material hanging loosely from the baler.
• ... connect the drive shaft to the tractor power take-off shaft;
• ... insert the spars of the bale ejector *.
• ... the ladder of the maintenance platform must be turned up
and locked.
• ... connect the lighting set of the machine to the tractor and
check function (also at daylight).
• ... insert and secure the pick-up guide wheels* in upper
position (pick-up width 2.25 m).
• ... fully release the manually operated brake. Otherwise
there is danger of fire by brakes running hot (e. g. in the
field).
Prior to operate the baler with connected machine (e.g. round
bale wrapper), obtain information from the manufacturer.
The wheel chocks (2 in number) which are part of the safety
equipment are to be carried on the baler at all times.
Permitted maximum speeds of individual assembly groups (e.g.
drawbar or axis) do not count for the allowed maximum speed
of the total machine (see data plate on the right machine side).
In this document only type relevant maximum speeds are listed.
Any deviating national regulations must always be observed.
WELGER RP 405 • RP 435