Driving Style - Welger RP 405 Operating Manual

Figure 90
WELGER RP 405 • RP 435
8.9

Driving style

8.9.1 Large swath
Drive speedily at nominal speed (hand throttle).
Let the swath centrally run into the pick-up.
If a small amount of baling material is in the baling chamber
and no pressure has built up yet (see pressure gauge), we
recommend to switch off the power take-off shaft during
empty runs (e.g. during turning round on the headland).
8.9.2 Small swath
Drive speedily at nominal speed (hand throttle).
The baling chamber must be evenly filled with material
across its entire width rapidly and without interruption.
At the beginning of each bale, change immediately
between left and right swath side and vice versa (Figure 90)
...
... until the set working pressure is reached (see pressure
gauge, Figure 91).
Figure 91
77