Field Deployment - Welger RP 405 Operating Manual

8

Field deployment

Attention!
The machine may only be operated by persons who are familiar
with the operating instructions and the safety instructions.
Never remove any malfunctions while the drive is running.
Never remove any harvested crop material from the machine
while the drive is running. Prior to work: Switch off power take-
off shaft, switch off tractor engine, remove ignition key and
disconnect drive shaft from power take-off shaft end.
During operation: do not climb the machine. Keep sufficient
distance to the range of action of the machine (pick-up, running
gear, tail gate, bale unloading area). As a matter of principle:
Riding on the machine is prohibited for the entire machine!
Keep children away from the machine!
Prior to first start: Make yourself with the control box and the
functions of this machine.
Nobody must stay between tractor and machine while the
tractor engine is running.
Never operate the machine with defective or removed protective
devices (e. g. casing sheets and distance brackets)! Before
opening the protections: Switch off power take-off shaft, switch
off tractor engine, remove ignition key and disconnect drive
shaft from power take-off shaft end.
Prior to enter the baling chamber: close tail gate locking device
(Figure 3).
Machines not coupled to the tractor must be secured against
accidental rolling away by applying the manually operated
brake (if available) and by means of wheel chocks.
Do not begin a journey with the machine attached unless the
manually operated brake has been completely released.
Otherwise there is a risk of fire due to brakes running hot.
70 WELGER RP 405 • RP 435