Tightening The Net Knife - Welger RP 405 Operating Manual

Figure 50
WELGER RP 405 • RP 435
6.2

Tightening the net knife

Normal case: the net knife is tensioned automatically whenever
the tail gate is opened.
Special case: if, while the baling chamber is filled, new net tying
is necessary without opening of the tail gate (e. g. because of a
net roll change or a fault), the net knife can be tensioned by
hand:
(Figure 50) Pull the knife carrier against the spring tension to
the front. Triggering is effected as described in the chapter
"Operation / Tying".
47