2.9 Symbolised Operating Instructions - Welger RP 405 Operating Manual

2.9 Symbolised operating instructions

The most important operating instructions are shown as symbols without text. The precise meaning is
described in the following.
Symbols
WELGER RP 405 • RP 435
Meaning / Spare part No.
The two lift eyes at the upper traverse are indicated by this
symbol.
Other fastening points are not permitted for crane suspension.
Spare part no.: 0389.48.00.00
Note on crane loading
To ensure safe loading of the machine either a spreader must
be used, or the transport chain must have a minimum length
of 2.40 m.
Spare part no.: 0386.46.00.00
Tail gate locking device
If the lever is positioned at right angles to the flow direction,
the tail gate is secured against lowering.
Spare part no.: 0387.66.00.00
Maximum permissible hydraulic pressure
The machine may only be connected to a hydraulic system
providing a maximum oil pressure of 210 bar.
Spare part no.: 0387.36.00.00
Adjusting the variable load valve
For driving on the road, the variable load valve of the
compressed-air brake must be set to "full brake force"
.
Spare part no.: 0385.01.00.00
15