Final Work - Webasto Thermo Top Evo Installation Documentation

Chevrolet Trax

Final Work

WARNING!
Mount removed parts in reverse order. Check all hoses, clamps and all electrical connections for firm
seating. Insulate and tie back all loose lines.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K, Order No. 111329).
• Connect the battery.
• Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
• Adjust digital timer, teach Telestart transmitter.
• Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
• Place caution label "Switch off parking heater before refuelling" in the area of the filler neck
• For initial startup and function check, see installation instructions
1
1
2
Ident. No.: 1321414B_EN
74
2
75
Status: 22.01.2014
Place wheel well trim 1 , copy markings and
cut out area.
2 Discard section
Align exhaust end section 2 flush with wheel
well trim 1 .
Cutting out
wheel well
trim
Aligning
exhaust
end section
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
© Webasto Thermo & Comfort SE 30